Shower Door Magnetic Seal

Model: SHS-028

Shower Door Magnetic Seal for B2B shower hardware sourcing. Clear paired profiles with dark magnetic inserts and glass-gripping channels. Confirm model dimensions, fit and finish before bulk ordering.

Material Proposed material options: Polycarbonate (PC) / flexible PVC.

Surface Finish Proposed finish options: Clear / translucent polymer.

Dimensions Proposed supply length: 2500 mm. Selection proposal only; not measured dimensions or an installation drawing for this model.

Glass Thickness Proposed glass options: 8 / 10 / 12 mm. Model-specific fit is not verified.

MOQ 200 pieces per model / specification.

Lead Time 30 calendar days.

Product Highlights

Product Details

Product configuration

Shower Door Magnetic Seal (SHS-028) is intended to bring compatible shower glass edges together with a paired magnetic sealing profile. Clear paired profiles with dark magnetic inserts and glass-gripping channels.

Selection and fit

Specify the meeting angle, gap, glass thickness and polarity arrangement. Request a matched pair and check the closed alignment on a sample assembly.

Bulk sourcing information

Provide the required quantity, drawing revision, finish reference and packing requirements. Agree the model-specific material, dimensions and supplied accessories before sample approval.

Compare the Shower Systems range and request a model-specific quotation.

Reference drawing

View source reference drawing (JPG)

Source reference for this catalogue record. This image is not an approved manufacturing or installation drawing. Dimensions and material notes shown on the image are unverified; the selection options listed on this page are separate proposals. Request a model-specific approved drawing before ordering or installation.

Applications

Shower door edge sealing

Choose the profile for its actual door-edge position, clearance and contact direction.

Seal profile replacement

Compare the full cross-section and glass fit with an existing sample. Similar clear profiles can have different sealing lips.

Enclosure assembly supply

Coordinate cut lengths and packing with the enclosure models. Confirm magnetic pairs where the system uses a magnetic closure.

Customization

Elim Hardware can review drawing-based changes to the actual glass thickness, profile cross-section, meeting gap, fin reach and required length. Material selection, finish, marking, coordinated accessories and private-label packaging are reviewed for manufacturing feasibility and the intended order.

Confirm the sample and drawing revision before bulk production. Concept finish images illustrate a proposed appearance and do not establish the production material or an available stock finish.

Learn about OEM and ODM development and the relevant manufacturing capabilities.

Frequently Asked Questions

Can I combine one magnetic strip with any other strip?

The profiles must match in geometry, angle and magnetic polarity. Order or verify a compatible pair rather than matching by appearance alone.

What information is needed to check SHS-028 compatibility?

Provide the actual glass thickness, profile cross-section, meeting gap, fin reach and required length. Proposed glass options: 8 / 10 / 12 mm. Model-specific fit is not verified.

How are material and finish confirmed?

Proposed material options: Polycarbonate (PC) / flexible PVC. Proposed finish options: Clear / translucent polymer. These are enquiry options; material certification and the approved finish sample identify the supplied specification.

What are the MOQ, sample time and production lead time?

Minimum order quantity: 200 pieces per model / specification. Production lead time: 30 calendar days. Proposed sample schedule: 7 calendar days. Production starts after order and specification approval; shipping time is additional.

Can this product be customized for a wholesale or project order?

Drawing-based changes can be reviewed. Send the actual glass thickness, profile cross-section, meeting gap, fin reach and required length, estimated quantity, intended market and packing requirements. The final scope depends on model suitability and manufacturing feasibility.

Specifications

Product model	SHS-028
Product configuration	Clear paired profiles with dark magnetic inserts and glass-gripping channels
Material	Proposed material options: Polycarbonate (PC) / flexible PVC.
Surface finish	Proposed finish options: Clear / translucent polymer.
Dimensions and fitting	Proposed supply length: 2500 mm. Selection proposal only; not measured dimensions or an installation drawing for this model.
Glass compatibility	Proposed glass options: 8 / 10 / 12 mm. Model-specific fit is not verified.
Supply scope	Seal profile or matched magnetic pair as quoted; confirm length and quantity per pack.

Trade Information

Minimum Order Quantity 200 pieces per model / specification.
Sample Time Proposed sample schedule: 7 calendar days.
Lead Time 30 calendar days.
Trade Terms Agree the Incoterm, named place and payment terms in the written quotation.
Packaging Agree protective packing, carton quantity and shipping marks for the actual order.
Quality Control Dimensional, surface and assembly checks against the approved sample/drawing; agree model-specific functional inspection. Check the actual glass thickness, profile cross-section, meeting gap, fin reach and required length.

Shower Door Magnetic Seal

Product Details

Product configuration

Selection and fit