Shower Threshold Water Bar

Model: SHS-034

Shower Threshold Water Bar for B2B shower hardware sourcing. Long threshold profile with a raised edge visible in the reference sections. Confirm model dimensions, fit and finish before bulk ordering.

Material Proposed material options: Aluminium.

Surface Finish Proposed finish options: Anodized aluminium.

Dimensions Proposed supply lengths: 3000 / 6000 mm. Selection proposal only; not measured dimensions or an installation drawing for this model.

Glass Thickness Not applicable: water-retaining strip, not a glass clamp.

MOQ 200 pieces per model / specification.

Lead Time 30 calendar days.

Product Highlights

Product Details

Product configuration

Shower Threshold Water Bar (SHS-034) is intended to form a low threshold detail at a shower entrance as part of the water-management layout. Long threshold profile with a raised edge visible in the reference sections.

Selection and fit

Specify the required profile height, overall width and cut length. Coordinate the threshold with floor levels, door sweep and the intended access arrangement.

Bulk sourcing information

Provide the required quantity, drawing revision, finish reference and packing requirements. Agree the model-specific material, dimensions and supplied accessories before sample approval.

Compare the Shower Systems range and request a model-specific quotation.

Reference drawing

View source reference drawing (JPG)

Source reference for this catalogue record. This image is not an approved manufacturing or installation drawing. Dimensions and material notes shown on the image are unverified; the selection options listed on this page are separate proposals. Request a model-specific approved drawing before ordering or installation.

Applications

Shower entrance thresholds

Coordinate the water-bar profile with the finished floor and shower entrance.

Door sweep interfaces

Check the profile height and door-bottom clearance with the selected sweep or bottom seal.

Project cutting schedules

Specify cut lengths, end treatment and packing to match the enclosure schedule.

Customization

Elim Hardware can review drawing-based changes to the profile cross-section, cut length, receiving surface, glass seating or door-bottom clearance. Material selection, finish, marking, coordinated accessories and private-label packaging are reviewed for manufacturing feasibility and the intended order.

Confirm the sample and drawing revision before bulk production. Concept finish images illustrate a proposed appearance and do not establish the production material or an available stock finish.

Learn about OEM and ODM development and the relevant manufacturing capabilities.

Frequently Asked Questions

Should this be listed as a glass-clamping component?

The illustrated threshold manages the doorway detail rather than gripping a glass panel. Its fit is determined by the floor and door clearances, not a glass-clamping range.

What information is needed to check SHS-034 compatibility?

Provide the profile cross-section, cut length, receiving surface, glass seating or door-bottom clearance. Not applicable: water-retaining strip, not a glass clamp.

How are material and finish confirmed?

Proposed material options: Aluminium. Proposed finish options: Anodized aluminium. These are enquiry options; material certification and the approved finish sample identify the supplied specification.

What are the MOQ, sample time and production lead time?

Minimum order quantity: 200 pieces per model / specification. Production lead time: 30 calendar days. Proposed sample schedule: 7 calendar days. Production starts after order and specification approval; shipping time is additional.

Can this product be customized for a wholesale or project order?

Drawing-based changes can be reviewed. Send the profile cross-section, cut length, receiving surface, glass seating or door-bottom clearance, estimated quantity, intended market and packing requirements. The final scope depends on model suitability and manufacturing feasibility.

Specifications

Product model	SHS-034
Product configuration	Long threshold profile with a raised edge visible in the reference sections
Material	Proposed material options: Aluminium.
Surface finish	Proposed finish options: Anodized aluminium.
Dimensions and fitting	Proposed supply lengths: 3000 / 6000 mm. Selection proposal only; not measured dimensions or an installation drawing for this model.
Glass compatibility	Not applicable: water-retaining strip, not a glass clamp.
Supply scope	Profile supplied to the agreed length; liners, end caps, sealants and fixings as separately specified.

Trade Information

Minimum Order Quantity 200 pieces per model / specification.
Sample Time Proposed sample schedule: 7 calendar days.
Lead Time 30 calendar days.
Trade Terms Agree the Incoterm, named place and payment terms in the written quotation.
Packaging Agree protective packing, carton quantity and shipping marks for the actual order.
Quality Control Dimensional, surface and assembly checks against the approved sample/drawing; agree model-specific functional inspection. Check the profile cross-section, cut length, receiving surface, glass seating or door-bottom clearance.

Shower Threshold Water Bar

Product Details

Product configuration

Selection and fit