Stainless Steel Shower Glass U-Channel

Model: SHS-041

Stainless Steel Shower Glass U-Channel for B2B shower hardware sourcing. Open U-shaped stainless steel profile shown in full-length and cross-section views. Confirm model dimensions, fit and finish before bulk ordering.

Material Proposed material options: AISI 304 / AISI 316 stainless steel.

Surface Finish Proposed finish options: Satin brushed / mirror polished.

Dimensions Proposed supply lengths: 3000 / 6000 mm. Selection proposal only; not measured dimensions or an installation drawing for this model.

Glass Thickness Proposed glass options: 10 / 12 mm. Model-specific fit is not verified.

MOQ 200 pieces per model / specification.

Lead Time 30 calendar days.

Product Highlights

Product Details

Product configuration

Stainless Steel Shower Glass U-Channel (SHS-041) is intended to locate a fixed shower glass edge within a continuous stainless steel channel profile. Open U-shaped stainless steel profile shown in full-length and cross-section views.

Selection and fit

Confirm stainless steel grade, internal channel width, section thickness and length. Coordinate surface appearance and the glass seating detail with the project specification.

Bulk sourcing information

Provide the required quantity, drawing revision, finish reference and packing requirements. Agree the model-specific material, dimensions and supplied accessories before sample approval.

Compare the Shower Systems range and request a model-specific quotation.

Reference drawing

View source reference drawing (JPG)

Source reference for this catalogue record. This image is not an approved manufacturing or installation drawing. Dimensions and material notes shown on the image are unverified; the selection options listed on this page are separate proposals. Request a model-specific approved drawing before ordering or installation.

Applications

Fixed shower glass edges

Locate the fixed panel within the confirmed channel section and glass seating detail.

Wall and floor channel layouts

Define the profile position, fixing approach and required channel lengths from the project drawing.

Profile distribution and project supply

Order by the approved section, material grade, finish and cutting schedule.

Customization

Elim Hardware can review drawing-based changes to the profile cross-section, cut length, receiving surface, glass seating or door-bottom clearance. Material selection, finish, marking, coordinated accessories and private-label packaging are reviewed for manufacturing feasibility and the intended order.

Confirm the sample and drawing revision before bulk production. Concept finish images illustrate a proposed appearance and do not establish the production material or an available stock finish.

Learn about OEM and ODM development and the relevant manufacturing capabilities.

Frequently Asked Questions

Can the stainless steel channel replace an aluminum channel directly?

Check the section dimensions, glass seating and fixing arrangement. Different materials and profiles should not be treated as interchangeable without reviewing the installation.

What information is needed to check SHS-041 compatibility?

Provide the profile cross-section, cut length, receiving surface, glass seating or door-bottom clearance. Proposed glass options: 10 / 12 mm. Model-specific fit is not verified.

How are material and finish confirmed?

Proposed material options: AISI 304 / AISI 316 stainless steel. Proposed finish options: Satin brushed / mirror polished. These are enquiry options; material certification and the approved finish sample identify the supplied specification.

What are the MOQ, sample time and production lead time?

Minimum order quantity: 200 pieces per model / specification. Production lead time: 30 calendar days. Proposed sample schedule: 7 calendar days. Production starts after order and specification approval; shipping time is additional.

Can this product be customized for a wholesale or project order?

Drawing-based changes can be reviewed. Send the profile cross-section, cut length, receiving surface, glass seating or door-bottom clearance, estimated quantity, intended market and packing requirements. The final scope depends on model suitability and manufacturing feasibility.

Specifications

Product model	SHS-041
Product configuration	Open U-shaped stainless steel profile shown in full-length and cross-section views
Material	Proposed material options: AISI 304 / AISI 316 stainless steel.
Surface finish	Proposed finish options: Satin brushed / mirror polished.
Dimensions and fitting	Proposed supply lengths: 3000 / 6000 mm. Selection proposal only; not measured dimensions or an installation drawing for this model.
Glass compatibility	Proposed glass options: 10 / 12 mm. Model-specific fit is not verified.
Supply scope	Profile supplied to the agreed length; liners, end caps, sealants and fixings as separately specified.

Trade Information

Minimum Order Quantity 200 pieces per model / specification.
Sample Time Proposed sample schedule: 7 calendar days.
Lead Time 30 calendar days.
Trade Terms Agree the Incoterm, named place and payment terms in the written quotation.
Packaging Agree protective packing, carton quantity and shipping marks for the actual order.
Quality Control Dimensional, surface and assembly checks against the approved sample/drawing; agree model-specific functional inspection. Check the profile cross-section, cut length, receiving surface, glass seating or door-bottom clearance.

Stainless Steel Shower Glass U-Channel

Product Details

Product configuration

Selection and fit